Elastomer Forming Metal Hose Making Machine

This equipment uses polyurethane as the drumming medium. Under the joint action of the hydraulic control system and the fixed-length mold, it can process seamless or welded single-layer stainless steel pipe blanks through positioning, drumming, and forming. Customized process, automatically and continuously formed into metal hoses with corresponding inner diameters.

• Hose inner diameter range: DN25-DN100mm.
• Wall thickness range: δ=0.23-0.6mm (small diameter, thin wall, large diameter, thick wall).
• Hose length range: L ≤ 10000mm.
• Use the steel belt automatic seam welding machine to automatically load the material using the rubber clamping block clamping mode.
• The expansion core rod bracket adopts a suitable supporting mechanism and can be controlled manually or automatically.
• The system adopts PLC programmable control mode, with manual and automatic control respectively, and a wave number counting display is set.
• The linear motion pair of the movable wall plate copper sleeve and the coupling shaft is changed to the relative motion of the linear bearing and the hard chromium-plated shaft.
• The moving pair between the sliding mold base and the movable wall panel is changed to linear guide mode.
• The movement of the movable wall panel adopts the encoder precise control mode.
• Operation control: realize human-machine operation interface, equipped with 9-inch touch screen and equipped with network interface.
• Touch screen: All process parameters can be adjusted and displayed in real time. Such as pressure adjustment, adjustment of all mold position distances, hydraulic oil temperature, etc. It will automatically stop when the fuel tank temperature reaches 60°C.
• The CPU, touch screen, and programming cables used in the equipment all use Chinese-made "Xinjie" brand components.

(If there are other configuration requirements, separate design arrangements will be made)

• All hydraulic components are made of domestic brands. (If there are other configuration requirements, separate design arrangements will be made)
• The size tolerance of the finished corrugated pipe shall be accepted according to IT18 level.
• Working voltage: 380V, 50HZ.
• Configuration: In addition to the main machine, there are 1 set of molds with inner diameters of DN25, 32, 40, 50, 65, 80 and 100mm, totaling 7 sets. Each set includes 1 piece of front and rear mold pieces and 1 piece of expansion core.

The specific manufacturing dimensions of the mold are based on the parameters provided by the buyer.