This series of hydraulic forming metal hose making machines is one of the necessary special equipment for manufacturing metal hoses.
Metal hoses, elastic elements, and bellows expansion joints are widely used in various fields such as chemical industry, electricity, petroleum, metallurgy, shipbuilding, aviation, aerospace, instrumentation, and even daily life due to their unique comprehensive performance. Since this type of product is large in quantity and wide in scope, with high quality requirements and special production and manufacturing technology, advanced technology and sophisticated equipment have become the key to improving production efficiency and reducing costs.
The machine adopts the principle of hydraulic bulging, which can automatically and continuously form single-layer or multi-layer stainless steel and carbon steel tube billets with different wall thicknesses into annular convolution metal hoses and expansion joints of corresponding diameters.
Due to the use of advanced hydraulic transmission technology, the movement of each component is more stable, with good adaptability and strong overload capacity. In particular, the system uses emulsion as the drum wave medium, which abandons the traditional oil as the medium, which brings the disadvantages of poor environment, high cost, and difficult cleaning.
The electrical system of this machine is controlled by PLC program controller (microcomputer), which is easy to operate, reliable, low failure rate, and can realize automatic and manual control respectively.
Interested in Buying Metal Hose Making Machine from Comflex?
Technical Parameters of the Hydro forming metal hose making machine
YKCX-65 hydraulic forming metal hose making machine:
A. Performance parameters:
The inner diameter range of the corrugated pipe that can be formed: Ф16-Ф65mm.
The wall thickness range of the corrugated pipe that can be formed: δ≤0.14×2-0.30×2mm.
(Special note: the wall thickness and the inner diameter must correspond one to one, the smaller the diameter, the thinner the wall, and the larger the diameter, the thicker the wall)
The length of the straight edge section that can be delivered is ≤150mm.
The positioning device for adjusting the opening position of the front and rear mold pieces when setting the drum wave, as well as the automatic straight edge delivery function.
YKCX-100 hydraulic forming metal hose making machine:
A. Performance parameters:
The inner diameter range of the corrugated pipe that can be formed: Ф25-Ф100mm.
The wall thickness range of the corrugated pipe that can be formed: δ≤0.20×2-0.50×2mm.
(Special note: the wall thickness and the inner diameter must correspond one to one, the smaller the diameter, the thinner the wall, and the larger the diameter, the thicker the wall)
The length of the straight edge section that can be delivered is ≤150mm.
The positioning device for adjusting the opening position of the front and rear mold pieces when setting the drum wave, as well as the automatic straight edge delivery function.
YKCX-150 hydraulic forming metal hose making machine:
A. Performance parameters:
The inner diameter range of the corrugated pipe that can be formed: Ф32-Ф159mm.
The wall thickness range of the corrugated pipe that can be formed: δ≤0.25×2-0.70×2mm.
(Special note: the wall thickness and the inner diameter must correspond one to one, the smaller the diameter, the thinner the wall, and the larger the diameter, the thicker the wall)
The length of the straight edge section that can be delivered is ≤200mm.
The positioning device for adjusting the opening position of the front and rear mold pieces when setting the drum wave. And the automatic straight edge delivery function
YKCX-300 hydraulic forming metal hose making machine:
A. Performance parameters:
The inner diameter range of the corrugated pipe that can be formed: Ф50-Ф300mm.
The wall thickness range of the corrugated pipe that can be formed: δ≤0.30×2-0.90×2mm.
(Special note: the wall thickness and inner diameter must correspond one to one, the smaller the diameter, the thinner the wall, and the larger the diameter, the thicker the wall)
The length of the straight edge section that can be delivered is ≤200mm.
YKCX-400 hydraulic forming metal hose making machine:
A. Performance parameters:
The inner diameter range of the corrugated pipe that can be formed: Ф80-Ф426mm.
The wall thickness range of the corrugated pipe that can be formed: δ≤0.30×2-1.1×2mm.
(Special note: the wall thickness and inner diameter must correspond one to one, the smaller the diameter, the thinner the wall, and the larger the diameter, the thicker the wall)
The length of the straight edge section that can be delivered is ≤200mm.
Contact Us