Under ideal working conditions, the operating speed of a metal hose forming machine remains constant. However, in actual operation, it’s common to encounter situations where the machine’s speed significantly slows down. Why does this happen? Many customers assume it’s a quality issue with the corrugated pipe forming equipment, but this is usually not the case. It’s mostly due to improper operation. Comflex has compiled the specific reasons below:
1. The throttle valve of the metal hose forming machine is not fully open, causing the machine to run slower.
2. The pipe diameter or the type of the metal hose forming machine is unsuitable, resulting in slower operation.
3. Inappropriate pressure in the metal hose forming machine is also a cause of slower operation.
4. Substandard hydraulic oil prevents the hydraulic system from functioning properly, naturally slowing down the machine.
5. The oil tank of the metal hose forming machine is not properly sealed, or the air filter cover is not properly closed.
6. The remote control valve of the metal hose forming machine is faulty.
7. The oil pipe joints and cylinder inlet/outlet are blocked by sludge or other foreign objects.
If you encounter a significant slowdown in the operating speed of your metal hose forming machine, don’t panic. Jiangsu Shuangjia has listed the possible causes for you. Simply check each of these causes one by one, and you will quickly find the problem and resolve it, restoring the corrugated pipe forming equipment to normal operation.
For other questions, please contact the metal hose forming machine manufacturer, Comflex Industrial Co., Ltd.